Setup a DIY Retro Gaming device with all of your favorite games

Using a Raspberry Pi, create a Retro Gaming device that can connect to a TV or computer monitor (HDMI or RCA).
Equipment needed:
*Raspberry Pi 3 B+ or Raspberry Pi 4 with Power Adapter
*Micro SD Card & Reader
*PC to setup the SD Card
*USB Keyboard
*HDMI Cable or 3.5MM Video AV Component Adapter

Install Retropie on Ubuntu 18.04.03

I found a nice guide to installing Retropie on Ubuntu 18.04.03 at a website called markontech and it works brilliantly.

sudo apt-get install -y git dialog unzip xmlstarlet
git clone --depth=1
cd RetroPie-Setup
sudo ./

Once the Retro-Pie install script is running, you will want to do a Basic Install and then navigate back to the menu and install the desired optional packages.

One thing I have learned: if you copy the retropie directory to a thumb drive (once it’s setup) each time you have a new setup, if you plug the thumb drive in, the computer will automatically copy the roms and bios files to the new install when emulation station is running. 🙂

Connect a PC to a Commodore 1541/1571 drive

Did you ever want to transfer files from your old Commodore 1541/1571 drive between your computer and a real drive? Did you also want to use a real Commodore floppy drive with the VICE emulator? Me too! 😉 Both of these things are possible with the zoomfloppy device being offered by Retro Innovations. You can download basically anything you want from (or any other commodore software source) and transfer it right to your floppy device so it can be used on a real Commodore 64 or Vic 20.

This device is unlike other solutions that only worked with specially built cables and DOS. You simply plug a USB cable between your zoomfloppy and your computer and then the serial cable between the zoomfloppy and the floppy drive. Once the physical connections are made, you simply run the OpenCBM software to transfer files or backup disks.

Here’s how to install a zoomfloppy device to your Ubuntu computer.

sudo apt-get install libusb-dev build-essential linux-headers-generic git

Install the CC64 Compiler:

cd ~
git clone
cd cc65
sudo prefix=/usr make install

Compile and install OpenCBM

cd ~
git clone git:// opencbm
cd opencbm/opencbm
make -f LINUX/Makefile
sudo make -f LINUX/Makefile install install-all install-plugin-xum1541
sudo ln -s /usr/local/lib/ /usr/lib/

Add udev rules for the ZoomFloppy hardware itself:

sudo pico /etc/udev/rules.d/45-opencbm-parallel.rules

Add this to the bottom of the file, then save and quit:

SUBSYSTEM!="usb_device", ACTION!="add", MODE="0666", GOTO="opencbm_rules_end"
# zoom floppy
ATTRS{idVendor}=="16d0", ATTRS{idProduct}=="0504", GROUP="users", MODE="0666"

Restart udev:

sudo service udev restart

Check the ZoomFloppy and IEC device status:

cbmctrl detect

Bonus: Get VICE to use the zoomfloppy interface to utilize a real 1541 Commodore Floppy Drive!

1. Settings -> Peripheral Settings -> Device #8 -> Enable IEC Device
2. Settings -> Peripheral Settings -> Device #8 -> Device Type -> Real Device Access

Commodore 64 (Vic 20, Pet, etc) emulator from Raspberry Pi Raspbian

I can confirm this install method (source) worked with a Raspberry Pi 4 using Raspbian Buster.
Compiles Vice and installs into /usr/local/bin. Initial launch reports a sound issue. If you go into settings (F12), there’s a sound configuration you can change to “Alsa”.

# get dependencies – this may take a long time and ~ 1.5 GB
sudo apt install autoconf automake build-essential byacc dos2unix flex libavcodec-dev libavformat-dev libgtk2.0-cil-dev libgtkglext1-dev libmp3lame-dev libmpg123-dev libpcap-dev libpulse-dev libreadline-dev libswscale-dev libvte-dev libxaw7-dev subversion texi2html texinfo yasm libgtk3.0-cil-dev xa65 libsdl2-dev

mkdir -p src
cd src
svn checkout trunk
cd trunk/vice
make -j4
sudo make install

8bitdo Sega Genesis Receiver Review

8bitdo Sega Genesis Receiver Review

The 8bitdo Genesis Receiver allows your Sega Genesis or Mega Drive to use a modern gamepad such as the PS4, PS3, XBox or Wii U (pictured) as well as a wide assortment of Bluetooth controllers. Also pictured on the right is another device used in a similar way for devices that accept USB such as the Nintendo Switch, the Mini Playstation, PCs, etc.


Youtube video:

Sega Master System

Image result for sega master systemIf you are unfamiliar with the 8-Bit Sega Master System, the game system that Sega sold before the 16-Bit Sega Genesis – you are in for a treat. This third generation video game system debuted in 1985 in Japan as the Sega Mark III.  The name wasn’t very well revived so when it debuted in 1986 in North America, it was relabeled the Master System. The system competed with the Nintendo NES, which debuted a year earlier. In Japan and North America, the system was far less popular than it was in Europe and Brazil. The incredibly popular Sega Genesis followed in the market two years later, making the Master System a footnote outside of Europe and Brazil. Despite this, many great games were created. I put together a list of the best games, though there are many more. If you are interested in checking out what the system offered, check out the titles below. Also, just for fun check out this embeded youtube video with 25 popular Master System titles.

A Sega Master System console will run you around $50 on ebay. Just like any other retro game system, the game cartridges can run anywhere from $10 to $300 depending on the rarity, condition, desirability, and completeness (box, manual, etc.)

If you have a gen 1 or gen 2 Sega Genesis, you can use a “power base converter” (which ranges between $50-100 on ebay) to play Sega Master System games.

Another option is to buy a Mega EverDrive X7, which will allow you to load up Master System, 32X and Genesis cartridge roms. Don’t ask me for roms or where to find them!

Another interesting option is to emulate the system with a Raspberry Pi using RetroPie. There are plenty of youtube videos around to show you how to do this. Essentially, you are going to install an OS image onto a micro SD card, put it in your Raspberry Pi, then install your rom images to the rom directory. This is a great option and highly encourage!

Good luck and happy gaming!

[table id=4 automatic_url_conversion=true /]

Manually Install RetroPie over Raspbian Stretch

If you are enjoying a full or lite install of Raspbian on your Raspberry Pi, you can also manually install RetroPie rather than work off of a RetroPie SD image.

It’s advisable to first tell your Pi to boot into console mode at boot. 

pi@raspberry:~$ sudo raspi-config
Choose (3) Boot Options
B1 Desktop/CLI
B2 Console Autologin (optionally, you could select B1 to log in)

Install RetroPie manually

Start by updating your system:

pi@raspberry:~$sudo apt-get update && sudo apt-get upgrade

Verify your local settings for a smooth installation.

pi@raspberry:~$sudo update-locale LC_ALL="en_US.UTF-8"

Now we install the packages needed by the installation script:

pi@raspberry:~$ sudo apt-get install git lsb-release 

Download the RetroPie setup script using git. If you don’t have git installed:

pi@raspberry:~$sudo apt install git-all


pi@raspberry:~$ cd
pi@raspberry:~$ git clone --depth=1 

Now run the script:

pi@raspberry:~$ cd RetroPie-Setup
pi@raspberry:~$ chmod +x
pi@raspberry:~$ sudo ./

The installation dialog appears:

Choose the basic install and then optional packages, settings and drivers. Once you are done, reboot and launch with:

pi@raspberry:~$ emulationstation